2007 Dodge Charger Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2007 Dodge Charger

• Q:

  How to Maintain and Fix a Windshield Washer Fluid Reservoir on 2007 Dodge Charger?

  A:

  To repair the reservoir for windshield wiper, start by disconnecting the negative battery cable. Remove the front fascia and then disconnect the electrical harness and hose from the reservoir to drain the fluid into a container. Finally, remove the rear mounting fastener and other fasteners and remove the reservoir.
• Q:

  How to Install Wiper Arms on 2007 Dodge Charger?

  A:

  To install the front wiper arms, place them on the pivots, secure with retaining nuts torqued to 18 Nm (13 ft. lbs.), and install nut caps. For the rear wiper arm, secure it with a retaining nut at the same torque, then install the nut cap.
• Q:

  How to Service a Wiper Motor on 2007 Dodge Charger?

  A:

  In order to service the wiper motor, remove the front wiper module and disconnect the negative cable of the battery. Remember to leave the bellcrank nut in place so that there are no timing problems. Undo the links at the bellcrank, detach the motor mounting bolts and save any pocket nuts, which will be reattached with the motor.