2007 Dodge Durango Catalytic Converter, Muffler, Exhaust Pipe, Tail Pipe

Catalytic Converter, Exhaust Pipe, Muffler Installation and Repair Tips for 2007 Dodge Durango

• Q:

  How to Install an Exhaust Pipe on 2007 Dodge Durango?

  A:

  Installation of the exhaust pipe requires replacement of band clamps and burrs. Install the pipe with the muffle, clamp it loosely and in place of the removed insulators add insulators. Test contact with body panels, clamp, tighten to 61 Nm, lower the vehicle, and check undercarriage exhaust leaks, repairing as necessary.
• Q:

  How to Maintain and Fix a Muffler on 2007 Dodge Durango?

  A:

  In order to fix the muffler, one must first raise the car using a hoist. Unscrew the tailpipe, the clamp with the muffler and catalytic converter. The second step is to remove the muffler isolators and the last one is to remove the muffler itself off the catalytic converter.
• Q:

  How to Properly Service or Replace a Catalytic Converter on 2007 Dodge Durango?

  A:

  During a service of exhaust parts, it is better to disconnect oxygen sensor to prevent its damage. Install band clamps and make sure that catalytic converter assembly is burr-free and aligned in the right manner. Install and loosely screw flange nuts and bolts and clearance fit. Lastly, screw clamps and check stoppage.