2007 Dodge Magnum Door Hinge, Door Check, Door Latch Assembly, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2007 Dodge Magnum

• Q:

  How to Service and Repair a Front Door Hinge on 2007 Dodge Magnum?

  A:

  To maintain the hinge of the front door, take out the door and indicate the position of the hinge bracket on the A-pillar. Take out screws that hold the hinge bracket and place an indication of the hinge position on the door. Lastly, unscrew and unnut the hinge off of the door.
• Q:

  How to Service and Repair a Front Door Latch Assembly on 2007 Dodge Magnum?

  A:

  To fix the front door latch, take off the trim panel, speaker and watershield. Unscrew the pull cup bracket and window regulator rail and disengage the interior and exterior latch release links. Remove the latch screws and disconnect the wiring and pull the latch forwards to access the door wire harness connector.
• Q:

  How to Install a Front Exterior Door Handle on 2007 Dodge Magnum?

  A:

  To install the front door exterior handle, align it with the mounting holes and tighten it using three screws with a torque of 5 Nm. For the driver side, attach lock actuator and latch release connections and then fix the pull cup bracket with screws attached with 11 NM and 10 NM. Reinstall the watershield, speaker and trim panel.