Part Notes: Mega Cab;Quad Cab, With Keyless Entry;Quad Cab, Without Keyless Entry;Regular/Quad Cab, Quad Cab, With Keyless Entry;Regular/Quad Cab, Quad Cab, Without Keyless Entry
Part Notes: Mega Cab, Power;Power;Quad Cab, Power, With Keyless Entry;Quad Cab, Power, Without Keyless Entry;Regular/Quad Cab, Quad Cab, Power, With Keyless Entry;Regular/Quad Cab, Quad Cab, Power, Without Keyless Entry
OEM 2007 Dodge Ram 3500 Parts for Front Door - Lock & Hardware
Authentic OEM Dodge components offer both excellent performance and a long service life. These genuine 2007 Dodge Ram 3500 parts are made of high quality materials to ensure they are as durable and strong as possible. The suitable option for vehicle maintenance, they are easy to install as per the instructions of the factory. To get new OE Front Door - Lock & Hardware parts, select JeepPartsDeal.com. We offer authentic OEM 2007 Dodge Ram 3500 Door Hinge, Door Check, Door Latch Assembly, Exterior Door Handle with manufacturer warranties, fair prices, a simple return policy and fast shipping.
Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2007 Dodge Ram 3500
Q:
How to Properly Install a Door Hinge on 2007 Dodge Ram 3500?
A:
Installation of rear door hinge To install rear door hinge, first position the upper hinge with washers, nut and bolt to 28 Nm (21 ft. lbs.). Adjust the door and tight upper hinge bolts. Install and tighten bolts on the lower hinge, re-install washers, nut and bolt and re-adjust as necessary. Complete by fitting the lower b-pillar trim.
Q:
How to Install a Door Latch Assembly on 2007 Dodge Ram 3500?
A:
Installation of the front door latch To fit the front door latch, place it into position in the door and fasten it with three bolts tightened to 10 Nm (89 in. lbs.). Install the actuator rod, wire harness and connect them to the latch and interior handle. Install door trim panel (and may need to adjust latch), and reposition waterdam.
Q:
How to Install a Front Exterior Door Handle on 2007 Dodge Ram 3500?
A:
To mount the front door exterior handle, place it on the front door and fix with two nuts tightened to 10 Nm (89 in. lbs.). Connect the actuator rods and, if necessary, the wire lead to the harness. Finally, install the door glass and re-connect the negative battery cable.