Front Door

2008 Chrysler Aspen Window Regulator, Door Latch Assembly, Power Window Switch, Door Lock Actuator Motor

Currently shopping for
2008 Chrysler Aspen
Change Vehicle
Vehicle Options
Limited
Vehicle Options
Limited
2 diagrams found for the vehicle you selected.Select your vehicle options to narrow down results.
  • 1.Front Door - Glass & Hardware
    2008 Chrysler Aspen Front Door Diagram 1 - Thumbnail
  • 2.Front Door - Lock & Hardware
    2008 Chrysler Aspen Front Door Diagram 2 - Thumbnail
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
  • 7 Chrysler 6506878AA Nut - Snap In
    6506878AA
    Nut - Snap In
    Lower Channel Nut
    • Location: Driver Side;Passenger Side
    MSRP: $11.65 Your Price: $7.92
    1
    Add To Cart

OEM 2008 Chrysler Aspen Parts for Front Door

Authentic OEM Chrysler components offer both excellent performance and a long service life. These genuine 2008 Chrysler Aspen parts are made of high quality materials to ensure they are as durable and strong as possible. The suitable option for vehicle maintenance, they are easy to install as per the instructions of the factory. To get new OE Front Door parts, select JeepPartsDeal.com. We offer authentic OEM 2008 Chrysler Aspen Window Regulator, Door Latch Assembly, Power Window Switch, Door Lock Actuator Motor with manufacturer warranties, fair prices, a simple return policy and fast shipping.

Door Latch Assembly, Window Regulator Installation and Repair Tips for 2008 Chrysler Aspen

  • Q:
    How to Install a Door Latch Assembly for the Front Door on 2008 Chrysler Aspen?
    A:
    To install the front door latch insert the latch into the door and connect the electrical connectors and the actuator rods then fix with screws tightened to 10 Nm. Adjust the latch, reposition the rear glass run channel and tighten the nut and bolt to 8 Nm before the watershield is installed.
  • Q:
    How to Remove a Front Door Window Regulator on 2008 Chrysler Aspen?
    A:
    To remove the front door window regulator, remove the watershield first. Fit the window switch so that the glass is in the way to reach the regulator nuts. Remove the nuts and secure the glass, remove and loosen the regulator bolts. Finally, disconnect the regulator from the door and disconnect the electrical connector.
See All Installation and Repair Tips