2008 Dodge Dakota Catalytic Converter, Muffler, Exhaust Pipe, Tail Pipe

Catalytic Converter, Exhaust Pipe, Muffler Installation and Repair Tips for 2008 Dodge Dakota

• Q:

  How to Maintain and Fix an Exhaust Pipe on 2008 Dodge Dakota?

  A:

  To repair the exhaust pipe, raise the vehicle and wear protective eyewear. Disconnect oxygen sensors and apply Mopar(R) Rust Penetrant to bolts. Remove the exhaust pipe-to-muffler clamp, insulators, and, if necessary, heat the connection to twist the tailpipe out before removing the exhaust pipe from the muffler.
• Q:

  How to Properly Service or Replace a Catalytic Converter on 2008 Dodge Dakota?

  A:

  When servicing exhaust components, remove the oxygen sensor to prevent damage. Replace band clamps after removing. Make sure there are no burrs on the catalytic converter pipe and lined up correctly. Tighten the new clamp at the converter to extension pipe connection to 61 Nm. After lowering the vehicle, look for leaks and adjust accordingly.
• Q:

  How to Safely Detach a Muffler on 2008 Dodge Dakota?

  A:

  In order to take out the muffler, put up the vehicle on a hoist. Unattach the tailpipe, and disconnect the clamp between the muffler and the catalytic converter and then the muffler isolators. Lastly, remove the muffler of the catalytic converter.