2008 Dodge Grand Caravan Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2008 Dodge Grand Caravan

• Q:

  How to Remove the Windshield Washer Fluid Reservoir on 2008 Dodge Grand Caravan?

  A:

  To remove the windshield washer reservoir, disconnect the battery negative cable and washer hose. Support the car, take off the right front wheel, disconnect the splash shield. Drain the fluid, disconnect electrical connectors, and remove mounting screws, and lift the reservoir to remove it from the mount on the body.
• Q:

  How to Install a Wiper Arm on the Rear on 2008 Dodge Grand Caravan?

  A:

  To install the rear wiper arm, make sure that the wiper motor is parked with the switch. Position arm 2 on the pivot and install and torque wiper arm nut to 10 Nm (85 in. lbs.). Finally, turn the nut cap onto the arm until it clicks into place.
• Q:

  How to Service and Repair a Front Wiper Motor on 2008 Dodge Grand Caravan?

  A:

  In order to fix the front wiper motor, fit three screws at 12 Nm with motor and crank assembly. Apply grease to the links, attach them to the motor and connect the wiper module and cowl grille. Install and align the wiper arms then tighten the nut to 30 Nm after reconnecting the battery.