2008 Dodge Ram 3500 Catalytic Converter, Muffler, Exhaust Pipe, Tail Pipe

Catalytic Converter, Exhaust Pipe, Muffler Installation and Repair Tips for 2008 Dodge Ram 3500

• Q:

  How to Install a Muffler on 3.7L, 4.7L, and 5.7L Engines on 2008 Dodge Ram 3500?

  A:

  In order to install muffler on the 3.7L/4.7L/5.7L engines, loosely screw the muffler and the clamps together to align. Connect hangers and clamp to 54 Nm (40 ft. lbs.). Always keep isolators in place, not more than 25 mm away of body panels and also ensure that exhaust leaks do not occur once the engine is started.
• Q:

  How to Detach the Exhaust Pipe from a 3.7L, 4.7L, or 5.7L Engine on 2008 Dodge Ram 3500?

  A:

  To remove the exhaust pipe from the 3.7L, 4.7L or 5.7L engine, raise and secure the car. Apply heat valve lubricant on the bolts and nuts and leave it for 5 minutes. Remove the bolts and nuts that connect the exhaust pipe and the manifold, then the clamp nuts and finally, the exhaust pipe.
• Q:

  How to Remove and Replace a Catalytic Converter on a 5.7L Engine on 2008 Dodge Ram 3500?

  A:

  To replace the catalytic converter on a 5.7L engine, raise the vehicle and apply heat valve lubricant to the bolts. Disconnect the oxygen sensor, remove clamps and nuts, then take out the bolts securing the converter to the exhaust manifold, and finally, remove the catalytic converter assembly.