2008 Dodge Viper Catalytic Converter, Exhaust Manifold, Exhaust Hanger, Exhaust Pipe

Catalytic Converter, Exhaust Hanger, Exhaust Manifold Installation and Repair Tips for 2008 Dodge Viper

• Q:

  How to Install a Catalytic Converter and Ensure It Fits Perfectly in the Exhaust System on 2008 Dodge Viper?

  A:

  In order to install the catalytic converter, loosely install the resonator and position the catalytic converter. Attach new V-Band clamp in the connection on the manifold and tighten to 11 Nm. Adjust components, screw pillar support isolators to 28 Nm and resonator clamp to 63 Nm. Install the oxygen sensor, check leakages and set it accordingly.
• Q:

  How to Install an Exhaust Hanger on 2008 Dodge Viper?

  A:

  Install the exhaust pipe/muffler hanger, attach the isolator, support and the heat shield to the bracket. Bolted by tightening with 28 Nm (in. lbs.) bolts. Once installed, ensure that there is no contact between the resonator and the body and make adjustments as necessary.
• Q:

  How to Remove and Replace the Right Exhaust Manifold on 2008 Dodge Viper?

  A:

  To replace the right exhaust manifold - protect the cylinder head covers, install a new gasket and manifold, tighten fasteners to 29 Nm. Raise the car, hook up the exhaust pipe by getting a new V-bande clamp, tighten to 11 Nm and tighten the engine mount. Reconnect the oxygen sensor, lower the vehicle and reconnect the battery components.