2008 Dodge Viper Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2008 Dodge Viper

• Q:

  How to Remove the Timing Chain and Sprockets on 2008 Dodge Viper?

  A:

  To eliminate the timing chain and the sprockets, unscrew the timing cover, the camshaft drive plate, mark the timing centers, and unscrew the camshaft sprocket. In the case of crankshaft sprocket, lubricate the crankshaft insert and bearing puller then remove it using the pullers.
• Q:

  How to Remove the Camshaft While Ensuring Proper Reassembly of Engine Components on 2008 Dodge Viper?

  A:

  To remove the camshaft, locate the rocker arms, push rods and hydraulic tappets for proper reinstallation. Remove the cylinder heads, hydraulic tappets and timing chain case. Remove the A/C compressor, bolts and install the oil pan. Line up timing marks and then remove cam phaser and thrust plate before removing camshaft.
• Q:

  How to remove a Timing Cover on 2008 Dodge Viper?

  A:

  To remove the timing cover, open the trunk, disconnect the negative battery cable and drain the cooling system. Remove various components such as hoses, power steering pump, generator, crankshaft pulley and A/C compressor. Finally, drain the oil in the engine, remove the oil pan, and remove the timing chain cover.