2009 Chrysler 300 Door Hinge, Door Check, Door Latch Assembly, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2009 Chrysler 300

• Q:

  How to Detach a Front Exterior Door Handle on 2009 Chrysler 300?

  A:

  To remove the front exterior handle, first detach the trim panel and speaker from the door. Remove the watershield, then unscrew the pull cup bracket and window regulator rear rail. Disengage the latch release link and lock actuator link, then unscrew and remove the exterior handle.
• Q:

  How to Install a Door Latch Assembly on 2009 Chrysler 300?

  A:

  To install the front door latch, connect the door wire harness to the latch, secure it with three screws, and engage the lock cylinder actuator link and both door handle release links. Position the interior latch lock link, install screws, and reinstall the watershield, speaker, and trim panel. Adjust the latch release screw.
• Q:

  How to Properly Install a Door Hinge on 2009 Chrysler 300?

  A:

  To install the front door hinge, secure the upper or lower hinge to the door stud and tighten the nut and screw to 28 Nm (21 ft. lbs.). Attach the hinge bracket to the lower A-pillar with three screws tightened to 30 Nm (22 ft. lbs.), then reinstall the front door.