2009 Chrysler Aspen Catalytic Converter, Muffler, Exhaust Pipe, Tail Pipe

Catalytic Converter, Muffler, Tail Pipe Installation and Repair Tips for 2009 Chrysler Aspen

• Q:

  How to Maintain and Fix a Muffler on 2009 Chrysler Aspen?

  A:

  In order to fix the muffler, one should begin by raising and fastening the vehicle. Disassemble the tailpipe, followed by eliminating the clamp between the muffler and the catalytic converter and the muffler isolators. Lastly, disconnect the muffler of the catalytic converter.
• Q:

  How to Safely Remove a Catalytic Converter from a 3.7L or 4.7L Engine on 2009 Chrysler Aspen?

  A:

  In order to take off the catalyst converter of the 3.7L or the 4.7L engine, elevate the vehicle and apply Mopar(R) Rust Penetrant on all the exhaust bolts. Unscrew the oxygen sensor and un-bolt the catalyst converter-to-manifold bolts, and the squeegee that attaches it to the exhaust pipe. Wipe off all tack welds, and wipe off converter.
• Q:

  How to Install a Tail Pipe on 2009 Chrysler Aspen?

  A:

  Installation of exhaust tailpipe requires the replacement of band clamps and burr removal of exhaust pipe. Attach it to the muffler, fit the clamp loosely and insert insulators. Test contact against body panels, clamp to 61 Nm and check leaks by lowering the vehicle, turning on the engine and looking.