2009 Dodge Dakota Door Hinge, Door Check, Door Latch Assembly, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2009 Dodge Dakota

• Q:

  How to Service a Door Latch Assembly on 2009 Dodge Dakota?

  A:

  In order to service the rear door latch, begin by taking off the trim panel. Next, undo the door handle and remove it. Unscrew the upper cable and loosen push pin hangers. Lastly, take off the four screws to detach the latch assembly on the door.
• Q:

  How to Remove the Front Exterior Door Handle on 2009 Dodge Dakota?

  A:

  To remove the front exterior handle, you first need to remove the watershield. Then, remove the clips, lock cylinder, and handle links from the latch. Remove the nuts and handle, disconnect the electrical connector if present and finally, remove the links and lock cylinder if equipped.
• Q:

  Can Door Hinge Maintenance Be Done Without Removing the Door on 2009 Dodge Dakota?

  A:

  To fix the rear door hinge, one hinge will be replaced at a time, without unscrewing the door. Find the hinge points of the mark, support the door and take out securing nuts and bolts. Take out external bolts and the other bolt of the b-pillar. Installation Use service studs to position the door correctly.