2009 Dodge Durango Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2009 Dodge Durango

• Q:

  How to Safely Remove a Camshaft Without Causing Damage on 2009 Dodge Durango?

  A:

  When removing the camshaft, do not rotate the timing chain on its own, or it will also cause damage. Prevent tensioner overextension using Wedge Locking Tool 8379 Set engine to TDC for cylinder No. 1, mark timing chain, and lock tensioners. Carefully pull out the camshaft without damaging bearing caps and rocker arms.
• Q:

  How to Remove and Replace a Timing Chain and Sprockets on 2009 Dodge Durango?

  A:

  In order to replace the timing chain and sprockets, you need to disconnect the battery, drain the cooling system and remove cylinder heads covers and radiator fan. Align timing marks, remove necessary components and carefully remove the chains and tensioners. Avoid rotating camshafts or crankshaft independently which will cause damage in the process.
• Q:

  How to Remove a Timing Cover on 2009 Dodge Durango?

  A:

  To remove the engine timing cover, disconnect the battery, drain the cooling system, and remove the electric cooling fan, fan shroud, and radiator fan. Disconnect heater hoses and the lower radiator hose, then remove the accessory drive belt tensioner, crankshaft damper, generator, and A/C compressor. Use Mopar(R) Grey Engine RTV sealant for sealing. Finally, remove the timing cover bolts.