2009 Dodge Grand Caravan Door Hinge, Door Latch Assembly, Door Lock Actuator Motor, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2009 Dodge Grand Caravan

• Q:

  How to Detach a Front Exterior Door Handle on 2009 Dodge Grand Caravan?

  A:

  To remove the front exterior door handle, ensure the door glass is up, then take off the door trim panel. Remove the close-out plug, door lock cylinder shield, and disengage the linkage rods. Remove the three bolts, pull the linkage arm down, and then pull the handle outward. Remove the lock cylinder if needed.
• Q:

  How to Service and Repair a Sliding Door Latch Assembly for Front on 2009 Dodge Grand Caravan?

  A:

  To repair the sliding door front latch, disconnect the battery negative cable, remove the door trim panel and module access grommet, then take out the three mounting fasteners. Remove the latch through the access hole, disconnect the latch cable, and finally take the latch out of the vehicle.
• Q:

  How to Maintain and Fix a Door Hinge on 2009 Dodge Grand Caravan?

  A:

  Repairing the front door hinge, masking the vehicle, and disconnecting the negative battery cable, and removing the wire harness on the door. Mark the positions of the hinge, and unscrew the nuts. Lastly, mark hinge positions on the cowl and eliminate the hinges when necessary.