2009 Dodge Journey Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2009 Dodge Journey

• Q:

  How to Remove the Windshield Washer Fluid Reservoir on 2009 Dodge Journey?

  A:

  To remove the windshield washer reservoir, remove the battery negative cable and siphon the fluid. Remove the air filter housing, if necessary, to access the air filter. Remove the wire harness and hoses from the washer pump and remove the screws holding the reservoir in place and lift it out of the cooling module.
• Q:

  How to Properly Service and Repair a Front Wiper Arm for Front on 2009 Dodge Journey?

  A:

  Wiper motor must be in the park position before the installation of the front wiper arms. Find matching lines on the windshield and the wiper arm tips and lift the arm upward to release tension and then attach the arm to the pivot shaft. Fasten the nut to 24 Nm, check the wipers and replace the cap.
• Q:

  How to Maintain and Fix a Wiper Motor on 2009 Dodge Journey?

  A:

  In order to repair the front wiper motor, screw it to the wiper linkage using three screws. Install the battery and wire harness again and check the motor. Reattach the sleeve bushing to the motor crank arm making sure that it swivels freely. Same procedure with the right wiper link and the cowl and wiper arms reinstalled.