2009 Dodge Ram 3500 Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2009 Dodge Ram 3500

• Q:

  How to Remove and Replace the Camshaft in a 5.7L Engine with MDS on 2009 Dodge Ram 3500?

  A:

  To fit in the camshaft, make it compatible with the MDS in 5.7L engines. Apply oil on the camshaft, fit tensioner plate, and tighten bolts. Fit the timing chain, oil pump and tappets. Install/reinstall cylinder heads, push rods, and rocker arms. Fully equipped with the intake manifold, radiator and leak check.
• Q:

  How to Service and Repair a Timing Chain on 2009 Dodge Ram 3500?

  A:

  To service the timing chain, you must disconnect the battery and drain the cooling system. Remove timing chain cover without removing the water pump. Align timing marks and install tensioner pin and do not disassemble camshaft phaser. Inspect and replace the timing chain tensioner and guide, if necessary.
• Q:

  How to Install a Timing Cover and Its Related Components on 2009 Dodge Ram 3500?

  A:

  Installation of the engine timing cover requires cleaning of the surfaces and putting in a new gasket. Install slide bushings and place the cover on and tighten fasteners to the required torque. Fit in the oil pan, A/C compressor and others. Lastly, add the filling in the cooling system, repeat the engine oil and lastly connect the battery.