2009 Jeep Commander Door Hinge, Door Check, Door Latch Assembly, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2009 Jeep Commander

• Q:

  How to Install a Front Door Hinge on 2009 Jeep Commander?

  A:

  When installing the front door hinge there is a need to apply an appropriate body sealant during hinge removal or relocation. Start by attaching hinges and bolts, matching them up to the reference marks from taking them out. Tighten the nuts to 31 Nm (23 ft. lbs.) before catching the door.
• Q:

  How to Install a Door Latch Assembly on 2009 Jeep Commander?

  A:

  To install the front door latch, you need to join the actuator rods and engage the retainers. Install the latch assembly in the door and fix it with three latches at 10.5 Nm, wire harness connection, interior handle actuator rod connection and exterior handle rods connection.
• Q:

  How to Install a Front Exterior Door Handle on 2009 Jeep Commander?

  A:

  To fit the front exterior handle, you need to first fit the lock cylinder into the handle. Place the handle at the door mounting hole and fix it with three bolts with a tightening of 7 Nm. Connect the actuator rods, install the door glass and fix the door latch on the front door if necessary.