How to Maintain an Oil Filter to Prevent Can Deformation on 2000 Chrysler 300M?

Make sure you do not change the shape of the filter can by using the remove/install tool band strap in its base lock seam which is improved by the base plate. To start, use a good quality oil filter wrench to loosen and remove the filter by hand and then throw it away. After that, clean the base and check the gasket connection area. Rub clean engine oil along the new filter gasket, fit the filter and tighten it so that it reaches 20 Nm (15 ft. lbs.) using the wrench if it is needed. Start up the engine at this stage and watch for signs of leaks.

OEM 2000 Chrysler 300M Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2000 Chrysler 300M Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler 300M Submodels:
- Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS

2000 Chrysler 300M Oil Filter Parts and Q&A

Q: How to Maintain an Oil Filter to Prevent Can Deformation on 2000 Chrysler 300M?
A: Make sure you do not change the shape of the filter can by using the remove/install tool band strap in its base lock seam which is improved by the base plate. To start, use a good quality oil filter wrench to loosen and remove the filter by hand and then throw it away. After that, clean the base and check the gasket connection area. Rub clean engine oil along the new filter gasket, fit the filter and tighten it so that it reaches 20 Nm (15 ft. lbs.) using the wrench if it is needed. Start up the engine at this stage and watch for signs of leaks.