How to Remove and Install the Right Side Engine Mount, and What Condition Factors Should Be Considered on 2000 Chrysler Cirrus?

The engine mount on the right is a HydroMount and it may crack, although that does not stop the mount from functioning well and does not need replacement unless there is a fluid leak. To remove the engine mount, hoist up the vehicle and take away the inner splash shield. After that, get off the right support assembly vertical fasteners from the frame rail and drop the vehicle to put the floor jack beneath the engine to take the load off the motor mounts. Take out the three bolts that tie the engine support assembly to the engine bracket, lift away the air conditioning dryer and take out the coolant container, then remove the right engine mount. End the process by taking away the three bolts holding the engine support bracket to the cylinder block. When re-installing the engine, remember that if the engine support bracket ws removed, install it and fix the bolts to 33 Nm (24 ft. lbs.). Secure the chosen engine mount, then add the frame rail using 61 Nm (46 ft. lbs.) of pressure. Attach the mount to the bolts on the engine bracket and tighten them to 61 Nm or 45 ft. lbs. Install the coolant reserve/recovery container, put the air conditioning dryer in place and add the mounting screw before bringing back the front inner splash shield. Adjustments to the engine/transmission assembly can be made by centering it as and when needed.

OEM 2000 Chrysler Cirrus Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2000 Chrysler Cirrus Motor Mount, Driver Side Part Number: 4573775AB
$197.25 MSRP: $254.00
You Save: $56.75 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Left Engine Mount; Torque Strut; Bracket; Transfer Case; Transmission Mount; Side Mount; Side Support; Support; Mount; Support Engine Mount
- Position: Driver Side
- Item Weight: 3.60 Pounds
- Item Dimensions: 7.7 x 5.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4573775AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Mount Bracket, Passenger Side Part Number: 4593455AA
$62.54 MSRP: $103.00
You Save: $40.46 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Engine Bracket; Side Bracket; Side Mount Bracket; Bracket Engine Mount
- Position: Passenger Side
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593455AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX | 4 Cyl 2.0 L GAS
View related parts
2000 Chrysler Cirrus Motor Mount, Passenger Side Part Number: 4573773AB
$421.33 MSRP: $601.00
You Save: $179.67 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Side Mount; Front Mount; Side Support; Support; Mount; Support Engine Mount; Engine Mount
- Position: Passenger Side
- Replaces: 4578001AB
- Item Weight: 3.20 Pounds
- Item Dimensions: 6.9 x 4.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4573773AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Support Bracket Part Number: 4593436AB
$60.62 MSRP: $69.55
You Save: $8.93 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Transmission Mount Bracket; Side Mount; Front Bracket
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593436AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.4 L GAS
View related parts
2000 Chrysler Cirrus Engine Support Part Number: 4593338AD
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Engine Carrier; Module Engine Support
- Item Weight: 3.50 Pounds
- Item Dimensions: 4.5 x 6.2 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593338AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX | 4 Cyl 2.0 L GAS
View related parts
2000 Chrysler Cirrus Engine Support Part Number: 4593445AA
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket; Engine Mount; Motor Mount; Rear Mount; Module Engine Support
- Item Weight: 6.80 Pounds
- Item Dimensions: 11.1 x 4.9 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593445AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX | 4 Cyl 2.0 L GAS

2000 Chrysler Cirrus Engine Mount Parts and Q&A

Q: How to Remove and Install the Right Side Engine Mount, and What Condition Factors Should Be Considered on 2000 Chrysler Cirrus?
A: The engine mount on the right is a HydroMount and it may crack, although that does not stop the mount from functioning well and does not need replacement unless there is a fluid leak. To remove the engine mount, hoist up the vehicle and take away the inner splash shield. After that, get off the right support assembly vertical fasteners from the frame rail and drop the vehicle to put the floor jack beneath the engine to take the load off the motor mounts. Take out the three bolts that tie the engine support assembly to the engine bracket, lift away the air conditioning dryer and take out the coolant container, then remove the right engine mount. End the process by taking away the three bolts holding the engine support bracket to the cylinder block. When re-installing the engine, remember that if the engine support bracket ws removed, install it and fix the bolts to 33 Nm (24 ft. lbs.). Secure the chosen engine mount, then add the frame rail using 61 Nm (46 ft. lbs.) of pressure. Attach the mount to the bolts on the engine bracket and tighten them to 61 Nm or 45 ft. lbs. Install the coolant reserve/recovery container, put the air conditioning dryer in place and add the mounting screw before bringing back the front inner splash shield. Adjustments to the engine/transmission assembly can be made by centering it as and when needed.