How to Service and Repair Engine Mounts on Chrysler Cirrus?

Before beginning any service or repairs, lift the vehicle with a hoist. When using a front mount, remove the bolt in the front mount and the attaching bolts securing the mount to the lower radiator support crossmember, keeping in mind that you may have to tilt the engine to give clearance. Once the old mount is taken out, put in the replacement front mount and, if you have a damping mount, add and attach the weight, then secure the new mount to the lower radiator crossmember with 61 Nm (45 ft. lbs. of torque). Add the through bolt and tighten it to 61 Nm (45 ft. lbs.) and then you can begin to lower the vehicle. To lift the rear, hoist the car and start by removing the rear engine mount's bolt, then remove the rear strut bracket and brace and the bolts on the suspension and angle the engine if it gets in your way during removal. After removing the first rear mount, place the new rear mount and attach it to the crossmember by tightening the bolts to 61 Nm (45 ft. lbs.). After that, connect the rear strut and support brackets, tighten the bolts as directed: 61 Nm (45 ft. lbs.) for the bolts connecting the front strut bracket to the crossmember, 108 Nm (80 ft. lbs.) for the nut joining the front support bracket to the crossmember and 61 Nm (45 ft. lbs.) for the bolt onto the rear strut through the support bracket. After that, turn the through bolt at the rear mount until it is tightened to 61 Nm (45 ft. lbs.) and lower the vehicle.

How to Remove and Install a Left Side Engine Mount Hydro-Mount on Chrysler Cirrus?

Having cracks on the left side engine mount shouldn't impact its work. Replace it only if you notice fluid coming out. Put a transmission jack below the transmission before starting to remove the mount. Following this, take out the three vertical bolts holding the connector to the transmission bracket. Take the mount to frame rail fasteners out and remove the mount next. To install the mount, align it with the frame rail and secure with mount rail fasteners to a torque of 33 Nm (24 ft. lbs.). If the transmission bracket is missing, set the new bracket in place and turn bolts to 61 Nm (45 ft. lbs.). Next, place the vertical bolts, from the mount to the transmission bracket and torque them to 61 Nm (45 ft. lbs.).

OEM Chrysler Cirrus Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
Chrysler Cirrus Motor Mount, Driver Side Part Number: 4573775AB
$197.25 MSRP: $254.00
You Save: $56.75 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Left Engine Mount; Torque Strut; Bracket; Transfer Case; Transmission Mount; Side Mount; Side Support; Support; Mount; Support Engine Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Cirrus Mount Bracket, Passenger Side Part Number: 4593455AA
$62.54 MSRP: $103.00
You Save: $40.46 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Engine Bracket; Side Bracket; Side Mount Bracket; Bracket Engine Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Cirrus Motor Mount, Passenger Side Part Number: 4573773AB
$421.33 MSRP: $601.00
You Save: $179.67 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Side Mount; Front Mount; Side Support; Support; Mount; Support Engine Mount; Engine Mount
- Position: Passenger Side
- Replaces: 4578001AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Cirrus Engine Support Part Number: 4593410
$168.31 MSRP: $213.36
You Save: $45.05 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Motor Mount; Support; Module; Screw/Washer, Right Engine Mount; Module, Engine Support; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler Cirrus | LX, LXi | 2.5L V6, 4 Cyl 2.4 L GAS
View related parts
Chrysler Cirrus Support Bracket Part Number: 4593436AB
$60.62 MSRP: $69.55
You Save: $8.93 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Transmission Mount Bracket; Side Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000, 1997 Chrysler Cirrus | LX, LXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Cirrus Engine Support Part Number: 4593338AD
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Engine Carrier; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Cirrus Support Bracket Part Number: 4663144AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Side Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler Cirrus | LX, LXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Cirrus Engine Support Part Number: 4593445AA
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket; Engine Mount; Motor Mount; Rear Mount; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX | 4 Cyl 2.0 L GAS

Chrysler Cirrus Engine Mount

Choose OEM Engine Mount that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Chrysler Cirrus vehicles serves two primary functions: It isolates sound and vibration arising from operation of the engine while at the same time, it gives proper support and location of the engine and transaxle within the combination of chassis. This isolation is specifically imperative for the purpose of comfort but it can also be very important to ensure that the correct position of the engine is preserved so as to avoid certain hazards especially to the parts of the vehicles. Chrysler Cirrus vehicles have had various types of Engine Mounts throughout their years of production, they have had rubber Engine Mounts, the fluid filled hydraulic Engine Mounts and the electronic active Engine Mounts. While traditional mounts are made of metal components with rubber subassemblies in-between, hydraulic mounts are able to absorb more vibrations. Active mounts that are most advanced are capable of changing stiffness depending with the revolutions per minute of the engine. They are often referred to as Engine Mounts and can wear out due to age, heat or exposure to fluids and may exhibit signs which include unusual noises and vibrations hence requires either inspection or replacement.

Chrysler Cirrus Engine Mount Parts and Q&A

Motor Mount, Passenger Side
4573773AB
Q: How to Service and Repair Engine Mounts on Chrysler Cirrus?
A:
Before beginning any service or repairs, lift the vehicle with a hoist. When using a front mount, remove the bolt in the front mount and the attaching bolts securing the mount to the lower radiator support crossmember, keeping in mind that you may have to tilt the engine to give clearance. Once the old mount is taken out, put in the replacement front mount and, if you have a damping mount, add and attach the weight, then secure the new mount to the lower radiator crossmember with 61 Nm (45 ft. lbs. of torque). Add the through bolt and tighten it to 61 Nm (45 ft. lbs.) and then you can begin to lower the vehicle. To lift the rear, hoist the car and start by removing the rear engine mount's bolt, then remove the rear strut bracket and brace and the bolts on the suspension and angle the engine if it gets in your way during removal. After removing the first rear mount, place the new rear mount and attach it to the crossmember by tightening the bolts to 61 Nm (45 ft. lbs.). After that, connect the rear strut and support brackets, tighten the bolts as directed: 61 Nm (45 ft. lbs.) for the bolts connecting the front strut bracket to the crossmember, 108 Nm (80 ft. lbs.) for the nut joining the front support bracket to the crossmember and 61 Nm (45 ft. lbs.) for the bolt onto the rear strut through the support bracket. After that, turn the through bolt at the rear mount until it is tightened to 61 Nm (45 ft. lbs.) and lower the vehicle.
Motor Mount, Driver Side
4573775AB
Q: How to Remove and Install a Left Side Engine Mount Hydro-Mount on Chrysler Cirrus?
A:
Having cracks on the left side engine mount shouldn't impact its work. Replace it only if you notice fluid coming out. Put a transmission jack below the transmission before starting to remove the mount. Following this, take out the three vertical bolts holding the connector to the transmission bracket. Take the mount to frame rail fasteners out and remove the mount next. To install the mount, align it with the frame rail and secure with mount rail fasteners to a torque of 33 Nm (24 ft. lbs.). If the transmission bracket is missing, set the new bracket in place and turn bolts to 61 Nm (45 ft. lbs.). Next, place the vertical bolts, from the mount to the transmission bracket and torque them to 61 Nm (45 ft. lbs.).