OEM 2000 Chrysler Cirrus Rack And Pinion

2000 Chrysler Cirrus Rack And Pinion Parts and Q&A

• Q: How Is the Rack and Pinion System Affected by Mounting Bolt Isolator Removal and Installation on 2000 Chrysler Cirrus?

  A: Carrying out the removal and installation of the mounting bolt isolator must be done when the rack and pinion assembly has been removed from the vehicle. Any leading design rack and pinion isolator mount bolt is a serviceable bit of the assembly and both isolator bushings are taken care of the same way, even though just the rear mount is shown here. Use a screwdriver to pop the sleeve off the mounting bolt isolator and then use it again to remove the mounting bolt isolator bushing from the rack and pinion mounting bracket. When assembling, moisten the mounting bolt isolator bushing with Mopar, Silicone Spray Lube or a similar lube and slip it into the rack and pinion mounting bracket from its lower part. After that, install the mounting bolt isolator bushing sleeve into the isolator bushing by pressing the sleeve up into the bushing with your hands.