What is the Best Way to Service the Right Front Wheelhouse Splash Shield on 2000 Chrysler Cirrus?

Start by lifting your vehicle on safety stands and then proceed to take off the right front wheel. After that, undo the screws holding the wheelhouse splash shield to the edge of the front fender and the front bumper fascia. Take out the fasteners at the rocker panel under the car and then unbolt the push-in fasteners holding the splash shield to the fender support. Once everything else is out, now take out the wheelhouse splash shield. To set up the splash shield, fit it to the work site and attach it with push-in fasteners into the supports on the fender and at the rocker panel. Do the same by screwing the other side of the supports to the front bumper fascia and front fender edges. Now, attach the front wheel that matches the other one and lower the vehicle off the hoist.

OEM 2000 Chrysler Cirrus Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheelhouses found

View related parts
2000 Chrysler Cirrus Splash Shield Part Number: 4696815
$11.40 MSRP: $65.40
You Save: $54.00 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Wheelhouse; Rear Shield; Shield, Rear Inner (Left); Shield Wheelhouse Rear; Shield Wheelhouse
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4696815
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Fender Liner Part Number: 4814061
$51.44 MSRP: $65.21
You Save: $13.77 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Fender Splash Shield; Shield Wheelhouse; Shield, Splash
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4814061
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Fender Liner Part Number: 4814060
$54.69 MSRP: $69.33
You Save: $14.64 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Wheelhouse; Shield Wheelhouse; Shield, Splash
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4814060
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Chrysler Cirrus Wheelhouse Parts and Q&A

Q: What is the Best Way to Service the Right Front Wheelhouse Splash Shield on 2000 Chrysler Cirrus?
A: Start by lifting your vehicle on safety stands and then proceed to take off the right front wheel. After that, undo the screws holding the wheelhouse splash shield to the edge of the front fender and the front bumper fascia. Take out the fasteners at the rocker panel under the car and then unbolt the push-in fasteners holding the splash shield to the fender support. Once everything else is out, now take out the wheelhouse splash shield. To set up the splash shield, fit it to the work site and attach it with push-in fasteners into the supports on the fender and at the rocker panel. Do the same by screwing the other side of the supports to the front bumper fascia and front fender edges. Now, attach the front wheel that matches the other one and lower the vehicle off the hoist.