OEM 2000 Chrysler Cirrus Wiper Motor

2000 Chrysler Cirrus Wiper Motor Parts and Q&A

• Q: How to Replace a Wiper Motor Assembly on 2000 Chrysler Cirrus?

  A: Before replacing the wiper motor assembly, unplug the battery negative remote cable. After that, eliminate the wiper arms and blades and remove the cowl screen as well. Remove the wing support bolts and then lose the four wiper motor assembly mounting screws. After that, raise and take out the assembly to get to the wire harness clip. Take the harness clip off the forward mounting leg and pull the wire connector off the motor to take out the whole assembly. When removing the motor from the machine, reverse the installation process, use a 10 to 12 Nm (89 to 106 in. lbs.) torque wrench on the mounting screws and be sure the motor connector seal is correctly positioned.