How to Service and Repair a Door Lock Switch on 2000 Chrysler Concorde?

The Door Lock Switch is repaired by opening the hood and dis-connecting the negative battery cable. Next, loosen the wiring connector and pigtail connector, and take out the switch in the door lock cylinder. To install, just switch these steps.

OEM 2000 Chrysler Concorde Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
2000 Chrysler Concorde Lock Switch, Front Part Number: 4760847AC
$31.78 MSRP: $45.85
You Save: $14.07 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Deck Lid Release; Trunk Lid Release; Liftgate Release; Door Lock Switch; Release Switch; Trunk Switch; Trunk Lid Switch; Switch; Switch Deck Lid Release
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4760847AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler Concorde Lock Switch, Front Part Number: 4760857AB
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front; Switch; Switch Door Lock; Door Lock Switch
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.7 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4760857AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2000 Chrysler Concorde Door Lock Switch Parts and Q&A

Q: How to Service and Repair a Door Lock Switch on 2000 Chrysler Concorde?
A: The Door Lock Switch is repaired by opening the hood and dis-connecting the negative battery cable. Next, loosen the wiring connector and pigtail connector, and take out the switch in the door lock cylinder. To install, just switch these steps.