How to Service an Oil Filter on 2000 Chrysler Concorde?

To service the oil filter, remove it with an appropriate oil filter wrench and make sure to dispose of it according to the rules for the environment. Then, make sure to clean the filter base and check the condition of the gasket sealing spot. Apply clean engine oil to the gasket of the new filter before installing it and tighten it with the filter wrench up to 20 Nm (15 ft. lbs.) pressure as soon as the gasket makes contact with the base. In case the crankcase was drained, add the proper oil to the proper level, start the engine and examine for leaks.

OEM 2000 Chrysler Concorde Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2000 Chrysler Concorde Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 2.7L V6, 3.2L V6, 3.3L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2000 Chrysler Concorde Oil Filter Parts and Q&A

Q: How to Service an Oil Filter on 2000 Chrysler Concorde?
A: To service the oil filter, remove it with an appropriate oil filter wrench and make sure to dispose of it according to the rules for the environment. Then, make sure to clean the filter base and check the condition of the gasket sealing spot. Apply clean engine oil to the gasket of the new filter before installing it and tighten it with the filter wrench up to 20 Nm (15 ft. lbs.) pressure as soon as the gasket makes contact with the base. In case the crankcase was drained, add the proper oil to the proper level, start the engine and examine for leaks.