How to Remove and Replace a Piston in an Engine on 2000 Chrysler Concorde?

In order to get a replacement piston, a ridge reamer can be used to clean out the top ridge of the cylinder bore. Mark positions of connecting rod, cap and remove them. Install piston rings with I.D. mark up of No. 2 ring. Stagger the gaps, lubricate the parts and fit the piston and connecting rod and tighten bolts to 27 Nm.

OEM 2000 Chrysler Concorde Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pistons found

View related parts
2000 Chrysler Concorde Piston Part Number: 5018627AD
$316.65 MSRP: $576.00
You Save: $259.35 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston Pin And Rod; Piston Pin And Rod
- Replaces: 5018627AB, 5018627AA, 5018627AC
- Item Weight: 2.60 Pounds
- Item Dimensions: 13.3 x 5.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018627AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LX | 6 Cyl 2.7 L GAS
View related parts
2000 Chrysler Concorde Piston Part Number: R5010332AA
Product Specifications
- Other Name: Piston Pin And Rod
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.6 x 5.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R5010332AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LXi | 6 Cyl 3.2 L GAS

2000 Chrysler Concorde Piston Parts and Q&A

Q: How to Remove and Replace a Piston in an Engine on 2000 Chrysler Concorde?
A: In order to get a replacement piston, a ridge reamer can be used to clean out the top ridge of the cylinder bore. Mark positions of connecting rod, cap and remove them. Install piston rings with I.D. mark up of No. 2 ring. Stagger the gaps, lubricate the parts and fit the piston and connecting rod and tighten bolts to 27 Nm.