How to Service and Repair an Exhaust Manifold on 2000 Chrysler Sebring?

First, to service or repair the exhaust manifold, take out the heated oxygen sensor and clean the manifold threads using an 18 mm (0.7 inches) x 1.5 + 6E tap. If you are using the old sensor, apply Loctite 771-64 or its substitute to the sensor threads. New sensors are already pre-coated, so you do not need to put on an antiseize compound. Also, check the exhaust manifold for cracks or any kind of damage.

OEM 2000 Chrysler Sebring Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Manifolds found

View related parts
2000 Chrysler Sebring Exhaust Manifold Part Number: MR212275
Product Specifications
- Other Name: Manifold; Manifold, Exhaust, Right; Manifold Exhaust Right; Manifold Exhaust
- Item Weight: 9.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR212275
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Sebring Submodels:
- LX, LXi | 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Sebring Exhaust Manifold Part Number: MD323973
Product Specifications
- Other Name: Manifold Exhaust; Manifold; Manifold, Exhaust - Right; Manifold Exhaust Right
- Item Weight: 12.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD323973
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Sebring Submodels:
- JX, JXi | 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Sebring Exhaust Manifold Part Number: MD323182
Product Specifications
- Other Name: Manifold - Exhaust; Heat Shield; Manifold; Manifold, Exhaust - Left; Manifold, Exhaust, Left; Manifold Exhaust Left; Manifold Exhaust
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD323182
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Sebring Submodels:
- JX, JXi, LX, LXi | 6 Cyl 2.5 L GAS

2000 Chrysler Sebring Exhaust Manifold Parts and Q&A

Q: How to Service and Repair an Exhaust Manifold on 2000 Chrysler Sebring?
A: First, to service or repair the exhaust manifold, take out the heated oxygen sensor and clean the manifold threads using an 18 mm (0.7 inches) x 1.5 + 6E tap. If you are using the old sensor, apply Loctite 771-64 or its substitute to the sensor threads. New sensors are already pre-coated, so you do not need to put on an antiseize compound. Also, check the exhaust manifold for cracks or any kind of damage.