How to Remove an Exhaust Manifold on Chrysler Sebring?

The exhaust manifold should be removed by starting with the removal of the engine cover. After that, unhook the negative terminal from the battery and remove the nuts that hold the upper heat shield before lifting off the shield. Then, remove the exhaust pipe from the manifold and the oxygen sensor's wiring connector. Following this, take off the manifold support bracket and the lower exhaust manifold heat shield. Remove the bolts holding the manifold in place and get rid of the manifold gasket at this point.

How to Install an Exhaust Manifold on Chrysler Sebring?

The first step in installing an exhaust manifold is to put a new gasket in place without putting any sealer on it. Install the exhaust manifold and fasten the bolts to 34 Nm (25 ft. lbs). After that, put the exhaust manifold heat shields in place, screwing the bolts to 12 Nm (105 in. lbs.). Add the exhaust manifold support bracket and put in a new gasket under the catalytic converter. Secure the exhaust pipe to the manifold and tighten all the bolts to 28 Nm (250 in. lbs.). Secure the electrical connector of the oxygen sensor to the car's connector. Lastly, fit on the engine cover.

OEM Chrysler Sebring Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Exhaust Manifolds found

View related parts
Chrysler Sebring Exhaust Manifold Part Number: 4693321AD
$321.77 MSRP: $479.00
You Save: $157.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Exhaust for Converter Manifold Assembly, Refer to Group 11 Exhaust.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Driver Side Part Number: 5171141AC
$2065.20 MSRP: $3030.00
You Save: $964.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 5171140AC
$2340.00 MSRP: $3425.00
You Save: $1085.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 5171140AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Driver Side Part Number: 5171143AD
$943.68 MSRP: $1360.00
You Save: $416.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 5171143AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: 4693342AE
$1026.29 MSRP: $1405.00
You Save: $378.71 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold
- Replaces: 4693342AD, 4693342AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | 2.4L L4
View related parts
Chrysler Sebring Catalytic Converter, Passenger Side Part Number: 68042142AB
$1504.15 MSRP: $2205.00
You Save: $700.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 68042142AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Catalytic Converter, Driver Side Part Number: 68042141AB
$1922.08 MSRP: $2820.00
You Save: $897.92 (32%)
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Left Catalytic Converter with Integrated Manifold.; Manifold
- Position: Driver Side
- Replaces: 68042141AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Driver Side Part Number: 4892149AE
$2048.03 MSRP: $3000.00
You Save: $951.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4892148AE
$2317.10 MSRP: $3395.00
You Save: $1077.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Driver Side Part Number: 4892155AD
$2694.95 MSRP: $3945.00
You Save: $1250.05 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: 5080860AA
Product Specifications
- Other Name: Manifold - Exhaust; Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4892154AD
$2935.40 MSRP: $4300.00
You Save: $1364.60 (32%)
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: MR597478
Product Specifications
- Other Name: Manifold - Exhaust; Catalytic Converter with Integrated Exhaust Manifold; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: MR552684
Product Specifications
- Other Name: Manifold Exhaust; Catalytic Converter with Integrated Exhaust Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001 Chrysler Sebring | LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: MR481816
Product Specifications
- Other Name: Manifold - Exhaust Right; Exhaust Manifold, Right; Manifold Exhaust Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Exhaust Manifold, Driver Side Part Number: MR481815
Product Specifications
- Other Name: Manifold - Exhaust Left; Exhaust Manifold, Left; Manifold Exhaust Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: MR212275
Product Specifications
- Other Name: Manifold; Manifold, Exhaust, Right; Manifold Exhaust Right; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | LX, LXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: MD323973
Product Specifications
- Other Name: Manifold Exhaust; Manifold; Manifold, Exhaust - Right; Manifold Exhaust Right
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: MD323182
Product Specifications
- Other Name: Manifold - Exhaust; Heat Shield; Manifold; Manifold, Exhaust - Left; Manifold, Exhaust, Left; Manifold Exhaust Left; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi, LX, LXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Exhaust Manifold Part Number: 4792538AA
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold Exhaust Manifold For Edv Engine Is Part Of Turbo Assembly; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Chrysler Sebring Exhaust Manifold

Choose OEM Exhaust Manifold that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Sebring Exhaust Manifold is a very important part of the vehicles as it is responsible for channeling hot exhaust gases from the engine to the exhaust system hence helping in fuel efficiency and emissions. Located at variably on the engine block, the manifold is formed in a way that minimizes intake reversion which in a way reduces the flow and general efficiency of the engine. Chrysler Sebring models have fitted various kinds of exhaust manifolds normally produced from cast iron or stainless steel. headers are also available known as low restriction headers used to further reduce the restriction and allow greater flow velocity of the exhaust gases. The only primary difference between standard exhaust manifolds and headers is that while the most standard exhaust manifolds are created with a basic design in mind, headers are created with the efficiency of the flow of gases in the engine in mind. Exhaust manifold needs to be checked for a regular period and changed when required so as to avoid the possible decline in the vehicle performance and potential danger that may result from the exhaust emissions to the passengers.

Chrysler Sebring Exhaust Manifold Parts and Q&A

Catalytic Converter, Passenger Side
5171140AC
Q: How to Remove an Exhaust Manifold on Chrysler Sebring?
A:
The exhaust manifold should be removed by starting with the removal of the engine cover. After that, unhook the negative terminal from the battery and remove the nuts that hold the upper heat shield before lifting off the shield. Then, remove the Exhaust Pipe from the manifold and the oxygen sensor's wiring connector. Following this, take off the manifold support bracket and the lower exhaust manifold heat shield. Remove the bolts holding the manifold in place and get rid of the manifold gasket at this point.
Catalytic Converter, Driver Side
5171143AD
Q: How to Install an Exhaust Manifold on Chrysler Sebring?
A:
The first step in installing an exhaust manifold is to put a new gasket in place without putting any sealer on it. Install the exhaust manifold and fasten the bolts to 34 Nm (25 ft. lbs). After that, put the exhaust manifold heat shields in place, screwing the bolts to 12 Nm (105 in. lbs.). Add the exhaust manifold support bracket and put in a new gasket under the catalytic converter. Secure the Exhaust Pipe to the manifold and tighten all the bolts to 28 Nm (250 in. lbs.). Secure the electrical connector of the Oxygen Sensor to the car's connector. Lastly, fit on the engine cover.