How to Replace the Fuel Level Sensor and Fuel Pump Assembly on 2000 Chrysler Sebring?

Before you change the fuel level sensor or fuel pump assembly, take out the rear seat cushion and remove the protector. Disconnect the hoses and connectors from each other to be able to take out the fuel pump assembly or fuel level sensor. In the end, make sure the packing positioning projections line up with the holes on the fuel pump assembly.

OEM 2000 Chrysler Sebring Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2000 Chrysler Sebring Fuel Gauge Sending Unit Part Number: 4897865AB
Product Specifications
- Other Name: Level Kit - Fuel; Sending Unit; Tank Gauge; Level Unit Kit Fuel
- Item Weight: 0.60 Pounds
- Item Dimensions: 11.1 x 6.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897865AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Sebring Submodels:
- JX, JXi | 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Sebring Fuel Pump Part Number: 4897804AC
Product Specifications
- Other Name: Module Kit - Fuel Pump/Level Unit; Assembly; Sending Unit.; Module Kit Fuel Pump/Level Unit
- Item Weight: 3.30 Pounds
- Item Dimensions: 21.9 x 7.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897804AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Sebring Submodels:
- JX, JXi | 6 Cyl 2.5 L GAS

2000 Chrysler Sebring Fuel Level Sensor Parts and Q&A

Q: How to Replace the Fuel Level Sensor and Fuel Pump Assembly on 2000 Chrysler Sebring?
A: Before you change the fuel level sensor or fuel pump assembly, take out the rear seat cushion and remove the protector. Disconnect the hoses and connectors from each other to be able to take out the fuel pump assembly or fuel level sensor. In the end, make sure the packing positioning projections line up with the holes on the fuel pump assembly.