How to Replace and Maintain an A/C Hose for Optimal Performance on 2000 Dodge Avenger?

Before you separate the refrigerant lines, block them with plugs to so the air and refrigerant fluid do not mix. Close your eyes and do the steps described. Place a little of the compressor oil, SUN PAG 56, into both the suction hose and the receiver assembly at the time of installation. The given volume for the suction tube is 10 cm3 (0.34 fl. oz.) and precisely that same amount is also required for the receiver.

OEM 2000 Dodge Avenger A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Hoses found

View related parts
2000 Dodge Avenger Discharge Hose Part Number: MR315086
Product Specifications
- Other Name: A/C Discharge; A/C Refrigerant Liquid Hose; A/C Hose; Hose A/C Discharge
- Item Weight: 1.00 Pounds
- Item Dimensions: 27.0 x 12.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR315086
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Avenger Submodels:
- Base, ES | 6 Cyl 2.5 L GAS
View related parts
2000 Dodge Avenger Suction Pipe Part Number: MR206137
Product Specifications
- Other Name: A/C Suction; A/C Hose; Pipe, Compressor Suction; Line A/C Suction
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR206137
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Avenger Submodels:
- Base, ES | 6 Cyl 2.5 L GAS

2000 Dodge Avenger A/C Hose Parts and Q&A

Q: How to Replace and Maintain an A/C Hose for Optimal Performance on 2000 Dodge Avenger?
A: Before you separate the refrigerant lines, block them with plugs to so the air and refrigerant fluid do not mix. Close your eyes and do the steps described. Place a little of the compressor oil, SUN PAG 56, into both the suction hose and the receiver assembly at the time of installation. The given volume for the suction tube is 10 cm3 (0.34 fl. oz.) and precisely that same amount is also required for the receiver.