How Are Emblems Removed and Installed on 2000 Dodge Durango?

In order to take the exterior nameplates off, place some masking tape to guide you, heat the emblem to a minimum of 21°C and then take it off with a plastic trim stick. Wipe away dirt using Mopar(R) Super Clean. To install, lay the emblem, rub, and heat once more in case of poor gluing.

OEM 2000 Dodge Durango Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Emblem found

View related parts
2000 Dodge Durango Medallion, Front Part Number: 55076512
Product Specifications
- Other Name: Ornament - Hood; Hood Emblem, Front; Nameplate; Medallion Hood Rams Head
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.1 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55076512
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Emblem Parts and Q&A

Q: How Are Emblems Removed and Installed on 2000 Dodge Durango?
A: In order to take the exterior nameplates off, place some masking tape to guide you, heat the emblem to a minimum of 21°C and then take it off with a plastic trim stick. Wipe away dirt using Mopar(R) Super Clean. To install, lay the emblem, rub, and heat once more in case of poor gluing.