JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Intrepid Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Intake Manifolds found
2000 Dodge Intrepid Intake Manifold Part Number: 5101819AA
Product Specifications- Other Name: Plenum - Intake Manifold; Intake Plenum
- Item Weight: 11.60 Pounds
- Item Dimensions: 29.9 x 27.3 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101819AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Intrepid Intake Manifold, Lower Part Number: 4591273AB
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Item Weight: 1.60 Pounds
- Item Dimensions: 16.5 x 4.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591273AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Intrepid Intake Manifold Part Number: 4792379AG
Product Specifications- Other Name: Plenum - Intake Manifold
- Replaces: 4792379AE, 4792379AD
- Item Weight: 10.10 Pounds
- Item Dimensions: 19.3 x 19.2 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792379AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Intrepid Intake Manifold Part Number: 5017188AA
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4792184AC, 4792184
- Item Weight: 8.90 Pounds
- Item Dimensions: 29.6 x 7.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017188AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Intrepid Intake Manifold Parts and Q&A
- Q: How to Service and Repair the Lower Intake Manifold on 2000 Dodge Intrepid?A: Release the pressure from the fuel system and take out the upper intake manifold to service and repair the lower intake manifold. Remove the power wires from the fuel injectors and take off the fuel supply hose from the fuel rail. After that, unscrew the screw linking the fuel rail support bracket to the throttle body support bracket and remove the bolts attaching the fuel rail. Then, remove the assembled fuel rail and injectors as one step. After all that, remove the bolts on the manifold and pull out the lower manifold. When installing, wipe the sealing surfaces of the cylinder head and manifold and clean and refuel the gaskets to make sure they have no cuts or tears. Put the manifold onto the hole of the cylinder head where the intake attaches and for easier installation of the upper intake manifold, begin attaching the lower manifold with a bolt 2 - 3 turns into the rearmost hole. Put the fuel rail with injectors in place and then attach the manifold with the specified bolts and tighten them to 12 Nm (105 in. lbs.) after that, removing the alignment bolt after it's tight. Connect everything on the fuel injector harness, making sure the injectors are not interfering with the upper intake manifold. Put in the screw between the fuel rail support bracket and the throttle body support bracket, hook up the fuel hose to the fuel rail and place the upper intake manifold. Perform the ASD Fuel System Test using the DRB scan tool and keep the Auto Shutdown (ASD relay) on for 7 minutes or until you turn off the ignition switch or click the Stop All Test option.
Related 2000 Dodge Intrepid Parts
2000 Dodge Intrepid Fuel Pump
2000 Dodge Intrepid Fuel Filter
2000 Dodge Intrepid Air Filter
2000 Dodge Intrepid Air Filter Box
2000 Dodge Intrepid Fuel Filler Neck
2000 Dodge Intrepid Fuel Level Sensor
2000 Dodge Intrepid Fuel Sending Unit
2000 Dodge Intrepid Fuel Tank
2000 Dodge Intrepid Fuel Tank Strap
2000 Dodge Intrepid Gas Cap
2000 Dodge Intrepid Intake Manifold Gasket
2000 Dodge Intrepid Throttle Cable