How to Service and Repair a Thermostat Housing on 2000 Dodge Intrepid?

To fix the thermostat housing, remove the negative cable and drain the cooling system. Remove the accessory drive belt and generator to get to. Remove hoses, thermostat and housing, clean surfaces, and install back. Reinsert hoses, generator, and belt, and fill the cooling system and re-connect the cable.

OEM 2000 Dodge Intrepid Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Thermostat Housings found

View related parts
2000 Dodge Intrepid Thermostat Housing Part Number: 4792361
$62.20 MSRP: $78.85
You Save: $16.65 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing Cover; Water Inlet; Housing Thermostat
- Item Weight: 1.20 Pounds
- Item Dimensions: 7.3 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792361
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Thermostat Cover Part Number: 4792328
$33.47 MSRP: $42.43
You Save: $8.96 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing - Thermostat; Engine Coolant Thermostat Housing; Engine Coolant Thermostat Housing Cover; Water Inlet; Housing Thermostat; Thermostat Housing
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.3 x 4.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792328
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2000 Dodge Intrepid Thermostat Housing Parts and Q&A

Q: How to Service and Repair a Thermostat Housing on 2000 Dodge Intrepid?
A: To fix the thermostat housing, remove the negative cable and drain the cooling system. Remove the accessory drive belt and generator to get to. Remove hoses, thermostat and housing, clean surfaces, and install back. Reinsert hoses, generator, and belt, and fill the cooling system and re-connect the cable.