OEM 2000 Dodge Intrepid Washer Reservoir

2000 Dodge Intrepid Washer Reservoir Parts and Q&A

• Q: How to Replace the Washer Reservoir on 2000 Dodge Intrepid?

  A: Before you replace the windshield washer reservoir, release the battery cable from the negative terminal on the remote battery using the hood. After that, unbolt the left headlamp assembly and keep it out of the way. After that, get rid of the four bolts that keep the washer reservoir in place, remove the pump and sensor wire connectors and take off the washer hose and the filler hose. Push the reservoir's front side inward and bring it out of your car. While putting in a new reservoir, take out the pump and sensor from the old one and use a new grommet to keep your servicing area leak-free. To install the washer, hook up the hose, filler tube and wiring to the reservoir, then tighten the retaining bolts between 9 to 14 N.m (90 to 124 in lbs). Don't forget to securely reconnect the negative cable to the battery.