How to Service and Repair a Door Lock Switch on 2000 Dodge Neon?

Before servicing or repairing the door lock switch, first pull out the wiring clip and disconnect the connector from the illuminated entry switch. After that, pull the door lock switch from the door handle. Use the same steps but in reverse when installing the engine.

OEM 2000 Dodge Neon Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
2000 Dodge Neon Window Switch Part Number: 4685435
Product Specifications
- Other Name: Switch - Power Door; Door Window Switch; Door Lock Switch; Lock Switch; Switch; Switch, W/Bezel, Power Window/Lock, Right, Cirrus; Switch Power Door; Switch Console
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685435
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Dodge Neon Lock Switch, Front Driver Side Part Number: 4793579AB
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front Left; Switch Door Lock; Door Lock Switch
- Position: Front Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793579AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2000 Dodge Neon Door Lock Switch Parts and Q&A

Q: How to Service and Repair a Door Lock Switch on 2000 Dodge Neon?
A: Before servicing or repairing the door lock switch, first pull out the wiring clip and disconnect the connector from the illuminated entry switch. After that, pull the door lock switch from the door handle. Use the same steps but in reverse when installing the engine.