How to Service and Repair a Door Lock Switch on 2001 Dodge Neon?

In order to fix the power door lock switch, one has to disconnect the battery negative cable, trim panel at the front door, and disconnect the wire connector. Unscrew the switch using two screws. Install the switch, the wire, and the trim panel once again, and connect the battery cable again.

OEM 2001 Dodge Neon Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
2001 Dodge Neon Window Switch Part Number: 4685435
Product Specifications
- Other Name: Switch - Power Door; Door Window Switch; Door Lock Switch; Lock Switch; Switch; Switch, W/Bezel, Power Window/Lock, Right, Cirrus; Switch Power Door; Switch Console
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685435
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Dodge Neon Lock Switch, Front Driver Side Part Number: 4793579AB
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front Left; Switch Door Lock; Door Lock Switch
- Position: Front Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793579AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2001 Dodge Neon Door Lock Switch Parts and Q&A

Q: How to Service and Repair a Door Lock Switch on 2001 Dodge Neon?
A: In order to fix the power door lock switch, one has to disconnect the battery negative cable, trim panel at the front door, and disconnect the wire connector. Unscrew the switch using two screws. Install the switch, the wire, and the trim panel once again, and connect the battery cable again.