How Does Wheelhouse Assist in Servicing and Repairing the Rear Fender Liner on 2000 Dodge Neon?

In order to fix the rear fender liner, begin with the removal of the wheel. Then remove two screws and three push pin fasteners. To reinstall, the shield should be put back in place, the three push-pin fasteners and two screws used and finally the wheel must be reassembled.

OEM 2000 Dodge Neon Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheelhouses found

View related parts
2000 Dodge Neon Fender Liner, Front Driver Side Part Number: 5008677AB
$91.31 MSRP: $105.00
You Save: $13.69 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Left
- Position: Front Driver Side
- Replaces: 5008095AC, 5008095AB, 5008675AA, 5008677AA
- Item Weight: 2.00 Pounds
- Item Dimensions: 44.1 x 7.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5008677AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Dodge Neon Fender Liner, Front Passenger Side Part Number: 5008676AB
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield, Front Right
- Position: Front Passenger Side
- Replaces: 5008094AC, 5008676AA, 5008094AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 26.0 x 7.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5008676AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Dodge Neon Splash Shield, Front Part Number: 5008389AC
Product Specifications
- Other Name: Shield - Accessory Drive; Fender Splash Shield, Front; Fender Splash Shield
- Position: Front
- Replaces: 4888564, 5008389AB, 5008389AA
- Item Weight: 5.20 Pounds
- Item Dimensions: 25.5 x 13.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5008389AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Dodge Neon Wheelhouse Liner, Rear Driver Side Part Number: 5008071AC
Product Specifications
- Other Name: Shield - Wheelhouse; Wheel Housing Side Panel, Rear Left; Shield Wheelhouse
- Position: Rear Driver Side
- Replaces: 5008071AB, 5008071AA
- Item Weight: 1.10 Pounds
- Item Dimensions: 24.3 x 15.2 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5008071AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Dodge Neon Wheelhouse Liner, Rear Passenger Side Part Number: 5008070AC
Product Specifications
- Other Name: Shield - Wheelhouse; Wheel Housing Side Panel, Rear Right; Fender Splash Shield; Shield Wheelhouse
- Position: Rear Passenger Side
- Replaces: 5008070AB, 5008070AA
- Item Weight: 1.10 Pounds
- Item Dimensions: 23.9 x 14.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5008070AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2000 Dodge Neon Wheelhouse Parts and Q&A

Q: How Does Wheelhouse Assist in Servicing and Repairing the Rear Fender Liner on 2000 Dodge Neon?
A: In order to fix the rear fender liner, begin with the removal of the wheel. Then remove two screws and three push pin fasteners. To reinstall, the shield should be put back in place, the three push-pin fasteners and two screws used and finally the wheel must be reassembled.