How to service a Power Window Switch on 2000 Dodge Ram 1500?

Disconnect the negative cable from the battery and isolate it before handling the power window switch. Insert a trim stick under the upper edge of the switch bezel, at the front and rear and gently pull it outward to free the retainer clips from the door panel. Press the switch and the bezel unit out far enough so that you can unplug the wire harness connector from the door trim panel. Take the switch and the bezel out from the door's interior trim panel. Put the rear of the bezel into the opening and press down on the front of the watch until the retaining tab locks in place.

OEM 2000 Dodge Ram 1500 Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Window Switch found

View related parts
2000 Dodge Ram 1500 Window Switch Part Number: 56021912AB
Product Specifications
- Other Name: Switch - Window And Door Lock; Door Window Switch; Switch Window And Door Lock 3 Gang; Switch Window And Door Lock
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.7 x 3.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56021912AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Power Window Switch Parts and Q&A

Q: How to service a Power Window Switch on 2000 Dodge Ram 1500?
A: Disconnect the negative cable from the battery and isolate it before handling the power window switch. Insert a trim stick under the upper edge of the switch bezel, at the front and rear and gently pull it outward to free the retainer clips from the door panel. Press the switch and the bezel unit out far enough so that you can unplug the wire harness connector from the door trim panel. Take the switch and the bezel out from the door's interior trim panel. Put the rear of the bezel into the opening and press down on the front of the watch until the retaining tab locks in place.