How to service the cruise control switch on 2000 Dodge Ram 1500 Van?

Severing the negative battery cable to turn off the air bag system allows disconnection of the cruise control switch, and waits two minutes to service the switch. Take away the air bag module, switch screws and switch. Unplug electrical connector, and re-install, make sure the torque is correct, and reconnect the battery.

OEM 2000 Dodge Ram 1500 Van Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Switches found

View related parts
2000 Dodge Ram 1500 Van Cruise Switch, Driver Side Part Number: 56021333AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch; Switch Speed Control
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56021333AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Van Cruise Switch, Passenger Side Part Number: 56021332AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch; Switch Speed Control
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56021332AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Van Cruise Control Switch Parts and Q&A

Q: How to service the cruise control switch on 2000 Dodge Ram 1500 Van?
A: Severing the negative battery cable to turn off the air bag system allows disconnection of the cruise control switch, and waits two minutes to service the switch. Take away the air bag module, switch screws and switch. Unplug electrical connector, and re-install, make sure the torque is correct, and reconnect the battery.