How to remove and install the fuel level sensor in the fuel pump module on 2000 Dodge Ram 1500 Van?

The fuel level sensor, which can be found on the fuel pump module on the inside of the tank, requires the tank to be removed to access. Disconnect the electrical connector and wires and slide the sensor down. Reinstalling by ensuring wire routing is correct and lock tab is secure Finally, re-connect everything and re-sinstall the tank.

OEM 2000 Dodge Ram 1500 Van Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2000 Dodge Ram 1500 Van Fuel Gauge Sending Unit Part Number: 5012270AA
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.5 x 6.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012270AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Van Fuel Gauge Sending Unit Part Number: 5012269AA
Product Specifications
- Other Name: Level Unit; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Sending Unit; Level Unit Kit Fuel
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012269AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Van Fuel Level Sensor Parts and Q&A

Q: How to remove and install the fuel level sensor in the fuel pump module on 2000 Dodge Ram 1500 Van?
A: The fuel level sensor, which can be found on the fuel pump module on the inside of the tank, requires the tank to be removed to access. Disconnect the electrical connector and wires and slide the sensor down. Reinstalling by ensuring wire routing is correct and lock tab is secure Finally, re-connect everything and re-sinstall the tank.