How to Service an Engine Mount on 2000 Dodge Ram 2500?

Start the front engine mount service by separating the negative battery cable and positioning the fan so that working on the radiator top tank and hose is safe, but you do not lift the engine by its intake manifold. Attach the engine support fixture and then raise the vehicle on a hoist. First, lift the engine a little to lose the thru-bolt and nut and then come off the cushion/support bracket bolts under the engine and the top cushion and heat shields. For placement, when the engine is slightly raised, put the engine support and heat shields on the block, fixing them in place with new bolts tightened to 81 Nm (60 ft. lbs.). After that, place the thru-bolt in the engine support and lower the engine while keeping the engine bracket aligned with the cushion brackets using the support/lifting fixture. After placing the thru-bolt nuts, tighten them to 68 Nm (50 ft. lbs.) torque, bring the vehicle down and remove the lifting system.

OEM 2000 Dodge Ram 2500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
2000 Dodge Ram 2500 Motor Mount Part Number: 52021490AC
$416.86 MSRP: $548.00
You Save: $131.14 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Mount; Insulator Engine Mount
- Replaces: 52021490AB
- Item Weight: 10.20 Pounds
- Item Dimensions: 6.6 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021490AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2000 Dodge Ram 2500 Motor Mount, Driver Side Part Number: 52018235AB
$72.15 MSRP: $119.00
You Save: $46.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Position: Driver Side
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52018235AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Rear Mount Part Number: 52058218
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 4.70 Pounds
- Item Dimensions: 9.0 x 3.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058218
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Motor Mount Part Number: 52021491AC
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Mount; Insulator Engine Mount
- Replaces: 52021491AB
- Item Weight: 10.40 Pounds
- Item Dimensions: 7.9 x 6.2 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021491AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2000 Dodge Ram 2500 Motor Mount Part Number: 52020327AB
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Front Mount; Insulator Engine Mount
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020327AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Motor Mount Part Number: 52020326AB
Product Specifications
- Other Name: Insulator Engine Mount; Engine Mount Bracket; Front Mount
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020326AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Motor Mount, Passenger Side Part Number: 52058804AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Position: Passenger Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.6 x 5.0 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058804AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Rear Mount Part Number: 52020251AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.9 x 3.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020251AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 2500 Engine Mount Parts and Q&A

Q: How to Service an Engine Mount on 2000 Dodge Ram 2500?
A: Start the front engine mount service by separating the negative battery cable and positioning the fan so that working on the radiator top tank and hose is safe, but you do not lift the engine by its intake manifold. Attach the engine support fixture and then raise the vehicle on a hoist. First, lift the engine a little to lose the thru-bolt and nut and then come off the cushion/support bracket bolts under the engine and the top cushion and heat shields. For placement, when the engine is slightly raised, put the engine support and heat shields on the block, fixing them in place with new bolts tightened to 81 Nm (60 ft. lbs.). After that, place the thru-bolt in the engine support and lower the engine while keeping the engine bracket aligned with the cushion brackets using the support/lifting fixture. After placing the thru-bolt nuts, tighten them to 68 Nm (50 ft. lbs.) torque, bring the vehicle down and remove the lifting system.