How to Remove and Install a Throttle Position Sensor on the Throttle Body on 2000 Dodge Ram 2500?

To remove the Throttle Position Sensor (TPS) remove the air intake tube, connecting the electrical connector. Remove the two mounting bolts and remove the TPS. For installation, make sure you find a good alignment with a throttle shaft, tighten bolts until 7 newton meters and check if there is a binding before reconnecting an electrical connector.

OEM 2000 Dodge Ram 2500 Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2000 Dodge Ram 2500 Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.2L V8, 5.9L V8, 8 Cyl 5.9 L GAS, 8.0L V10

2000 Dodge Ram 2500 Throttle Position Sensor Parts and Q&A

Q: How to Remove and Install a Throttle Position Sensor on the Throttle Body on 2000 Dodge Ram 2500?
A: To remove the Throttle Position Sensor (TPS) remove the air intake tube, connecting the electrical connector. Remove the two mounting bolts and remove the TPS. For installation, make sure you find a good alignment with a throttle shaft, tighten bolts until 7 newton meters and check if there is a binding before reconnecting an electrical connector.