How to remove and install the MAP sensor on the throttle body on 2000 Dodge Ram 2500 Van?

To remove the MAP sensor from the throttle body, first remove the engine cover and air cleaner and then disconnect the electrical connector. Take the mounting bolts out and slide the rubber fitting off. For installation, reverse, make sure fitting and torque 3 Nm (25 in. lbs.).

OEM 2000 Dodge Ram 2500 Van MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2000 Dodge Ram 2500 Van M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 2500 Van MAP Sensor Parts and Q&A

Q: How to remove and install the MAP sensor on the throttle body on 2000 Dodge Ram 2500 Van?
A: To remove the MAP sensor from the throttle body, first remove the engine cover and air cleaner and then disconnect the electrical connector. Take the mounting bolts out and slide the rubber fitting off. For installation, reverse, make sure fitting and torque 3 Nm (25 in. lbs.).