How to service the front shock absorber on 2000 Dodge Ram 2500 Van?

Remove the upper nut, retainer and bushing from the shock stud before doing any work on the front shock. Then, raise your vehicle, remove the bottom bolts and lift out the shock from the lower suspension arm. First, ease the lower retainer and bushing onto the stud and then push the shock absorber into the frame hole through the lower suspension arm and up to the upper stud. After that, put in the lower shock bolts and tighten them to a torque of 23 Nm (17 ft. lbs.). The last step is to install the upper grommet and retainer on the shock absorber stud, then the nut and tighten it to 34 Nm or 25 ft. lbs.

OEM 2000 Dodge Ram 2500 Van Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shock Absorber found

View related parts
2000 Dodge Ram 2500 Van Shock Absorber, Rear Part Number: 52039319AC
$9.84 MSRP: $12.47
You Save: $2.63 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Package - Suspension; Shock Absorber, Rear; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52039319AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 2500 Van Shock Absorber Parts and Q&A

Q: How to service the front shock absorber on 2000 Dodge Ram 2500 Van?
A: Remove the upper nut, retainer and bushing from the shock stud before doing any work on the front shock. Then, raise your vehicle, remove the bottom bolts and lift out the shock from the lower suspension arm. First, ease the lower retainer and bushing onto the stud and then push the shock absorber into the frame hole through the lower suspension arm and up to the upper stud. After that, put in the lower shock bolts and tighten them to a torque of 23 Nm (17 ft. lbs.). The last step is to install the upper grommet and retainer on the shock absorber stud, then the nut and tighten it to 34 Nm or 25 ft. lbs.