How to Service and Repair a Pitman Arm in an Independent Front Suspension on 2000 Dodge Ram 3500?

To repair the Pitman Arm in an Independent Front Suspension, remove the tie-rod nut and detach the tie-rod end ball studs. Remove the inner tie-rod ends and idler arm components. Mark positions, then remove and install the pitman arm. Tighten all components to specified torque and adjust the toe.

OEM 2000 Dodge Ram 3500 Pitman Arm

Steering Pitman Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pitman Arms found

View related parts
2000 Dodge Ram 3500 Pitman Arm Part Number: 68069795AA
Product Specifications
- Other Name: Arm - Pitman; Steering Pitman Arm; Idler Arm
- Item Weight: 3.60 Pounds
- Item Dimensions: 8.5 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68069795AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Pitman Arm Part Number: 68307383AA
Product Specifications
- Other Name: Arm - Pitman; Steering Pitman Arm; Idler Arm
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.9 x 4.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68307383AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Pitman Arm Parts and Q&A

Q: How to Service and Repair a Pitman Arm in an Independent Front Suspension on 2000 Dodge Ram 3500?
A: To repair the Pitman Arm in an Independent Front Suspension, remove the tie-rod nut and detach the tie-rod end ball studs. Remove the inner tie-rod ends and idler arm components. Mark positions, then remove and install the pitman arm. Tighten all components to specified torque and adjust the toe.