Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Ram 3500 Release Bearing

Clutch Release Throw Out Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Release Bearings found

  • 2000 Dodge Ram 3500 Release Bearing - 53008342
    2000 Dodge Ram 3500 Release Bearing - 53008342
    2000 Dodge Ram 3500 Release Bearing - 53008342
    2000 Dodge Ram 3500 Release Bearing - 53008342
    2000 Dodge Ram 3500 Release Bearing Diagram - 53008342
    View related parts

    2000 Dodge Ram 3500 Release Bearing Part Number: 53008342

    $153.85 MSRP: $231.00
    You Save: $77.15 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Assembly, With Sleeve, Clutch Release 1990-91; For 3.9 L, 5.2 L, 5.9 L Engines.
    • Replaces: 53008342AB
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 3.2 x 4.9 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53008342
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Ram 3500 Submodels:
    • Base, Laramie, SLT, ST, SXT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
  • 2000 Dodge Ram 3500 Release Bearing - 52087514
    2000 Dodge Ram 3500 Release Bearing - 52087514
    2000 Dodge Ram 3500 Release Bearing - 52087514
    2000 Dodge Ram 3500 Release Bearing - 52087514
    2000 Dodge Ram 3500 Release Bearing - 52087514
    2000 Dodge Ram 3500 Release Bearing Diagram - 52087514
    View related parts

    2000 Dodge Ram 3500 Release Bearing Part Number: 52087514

    $192.53 MSRP: $257.00
    You Save: $64.47 (26%)
    ADD TO CART
    Product Specifications
    • Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing, Clutch Release W/3.9 L, 5.2 L, 5.9 L Engine; Bearing Clutch Release
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 3.2 x 4.8 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52087514
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Ram 3500 Submodels:
    • Base, Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL

2000 Dodge Ram 3500 Release Bearing Parts and Q&A

  • Q: How to Service and Repair a Release Bearing on 2000 Dodge Ram 3500?
    A: Start by removing the transmission and transfer case, if necessary and only then remove the clutch housing under the NV4500. Pull the release fork away from the boat and remove the bearing. Inspect the transmission front bearing retainer and check the bearing slide surface. If it's scored, worn or cracked, replace the retainer. Make sure the stud inside the fork is in good shape and check that it is not loose by monitoring the release lever. If the fork spring clips are misshapen, change them as necessary. Use Mopar high temperature bearing grease to coat the splines on the input shaft, the retainer slide on the bearing, the pivot ball stud on the lever and the pivot surface on the release lever. Attach the release bearing and release fork, guaranteeing they are held together by spring clips and that the fork is in the right place, so the top edge on the fork's rear faces the slave cylinder in the transmission. After that, set the clutch housing back into place if removed and put the transmission and transfer case in if they are part of the system.

Related 2000 Dodge Ram 3500 Parts

Alternate Year Models

+
1999 Dodge Ram 3500 Release Bearing 2001 Dodge Ram 3500 Release Bearing