How to Maintain and Repair a Drive Shaft on 2000 Dodge Ram 3500 Van?

To service and repair the drive/propeller shaft, start by cleaning all universal joint bores with a solvent and wire brush. Then, check the yokes for distortion, cracks, and wear in the bearing cap bores.

OEM 2000 Dodge Ram 3500 Van Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Shafts found

View related parts
2000 Dodge Ram 3500 Van Drive Shaft Part Number: 52105410AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105410AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Van Drive Shaft Part Number: 52105678AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive
- Replaces: 52105678AB
- Item Weight: 25.70 Pounds
- Item Dimensions: 69.8 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105678AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Van Drive Shaft Part Number: 52105411AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52105411AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105411AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 3500 Van Submodels:
- Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Van Drive Shaft Parts and Q&A

Q: How to Maintain and Repair a Drive Shaft on 2000 Dodge Ram 3500 Van?
A: To service and repair the drive/propeller shaft, start by cleaning all universal joint bores with a solvent and wire brush. Then, check the yokes for distortion, cracks, and wear in the bearing cap bores.