How to Maintain and Fix the Rear Door Weather Strip on 2000 Dodge Viper?

The first step to service a rear door weather strip is to unclip the push pin at the bottom of the windshield that holds the door opening weather strip to the A-pillar. Go on to pull the weather strip out of the flange below the door sill, B-pillar and lower A-pillar, along with the weather strip retainers at the top of the A-pillar and on the roof and windshield and then remove it from the car. When installing, put the push pin fastener in the weather strip into the matching hole in the A-pillar at the bottom of the windshield. Put the weather strip between the weather strip retainers on the windshield side and push it gently along the frame. If you need to, place adhesive on the back of the weather strip and attach it to the flange on the lower part of the A-pillar, door sill and B-pillar, then gently push the weather strip into place along the flange in all these areas.

OEM 2000 Dodge Viper Weather Strip

Door Weatherstripping

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Weather Strips found

View related parts
2000 Dodge Viper Belt Weatherstrip Part Number: 4854261AA
Product Specifications
- Other Name: Weather Strip - Door Belt; Weatherstrip; Door Seal; Weatherstrip, Door Belt
- Item Weight: 1.10 Pounds
- Item Dimensions: 27.8 x 12.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4854261AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4848205
Product Specifications
- Other Name: Seal - Door; Door Seal; Seal, Door Opening Primary; Seal Door Rear; Seal Door
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 2.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848205
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4848204
Product Specifications
- Other Name: Seal - Door; Door Seal; Seal, Door Opening Primary; Seal Door Rear; Seal Door
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 8.9 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848204
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Filler Part Number: 4848907AA
Product Specifications
- Other Name: Filler - Door; Seal Door
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.2 x 2.6 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848907AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Belt Weatherstrip Part Number: 4854262AA
Product Specifications
- Other Name: Weather Strip - Door Belt; Weatherstrip; Door Seal; Weatherstrip, Door Belt
- Item Weight: 1.20 Pounds
- Item Dimensions: 36.7 x 5.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4854262AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Belt Weatherstrip Part Number: 4763882AE
Product Specifications
- Other Name: Weather Strip - Door Belt; Weatherstrip; Door Seal; Weatherstrip, Door Belt
- Item Weight: 1.00 Pounds
- Item Dimensions: 36.2 x 6.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763882AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Blower Assembly Part Number: 4763879AE
Product Specifications
- Other Name: Weather Strip - Door Glass; Blower Motor; Weatherstrip; Door Seal; Weatherstrip, Door Glass
- Item Weight: 3.00 Pounds
- Item Dimensions: 37.6 x 28.4 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763879AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4763671AB
Product Specifications
- Other Name: Weather Strip - Liftgate Glass; Weatherstrip Liftgate Glass
- Item Weight: 3.90 Pounds
- Item Dimensions: 29.7 x 23.3 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763671AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4642872
Product Specifications
- Other Name: Seal - Door; Door Seal; Seal, Door Opening Secondary; Seal Door
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4642872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Belt Weatherstrip Part Number: 4763883AE
Product Specifications
- Other Name: Weather Strip - Door Belt; Weatherstrip; Door Seal; Weatherstrip, Door Belt
- Replaces: 4763883AD
- Item Weight: 1.70 Pounds
- Item Dimensions: 39.4 x 3.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763883AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4865813AA
Product Specifications
- Other Name: Weather Strip - Liftgate Opening; Weatherstrip Liftgate Opening
- Item Weight: 2.70 Pounds
- Item Dimensions: 15.6 x 14.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4865813AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4848305AH
Product Specifications
- Other Name: Weather Strip - A - Pillar To Roof; Door Seal; Weatherstrip A - Pillar To Roof
- Replaces: 4848305AG
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.2 x 11.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848305AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS, 8.0L V10
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4763878AE
Product Specifications
- Other Name: Weather Strip - Door Glass; Door Seal; Weatherstrip, Door Glass
- Item Weight: 2.90 Pounds
- Item Dimensions: 33.0 x 26.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763878AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Weatherstrip Part Number: 4848304AH
Product Specifications
- Other Name: Weather Strip - A - Pillar To Roof; Door Seal; Weatherstrip A - Pillar To Roof
- Replaces: 4848304AG, 4848304AF
- Item Weight: 2.10 Pounds
- Item Dimensions: 16.2 x 15.5 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848304AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS, 8.0L V10

2000 Dodge Viper Weather Strip Parts and Q&A

Q: How to Maintain and Fix the Rear Door Weather Strip on 2000 Dodge Viper?
A: The first step to service a rear door weather strip is to unclip the push pin at the bottom of the windshield that holds the door opening weather strip to the A-pillar. Go on to pull the weather strip out of the flange below the door sill, B-pillar and lower A-pillar, along with the weather strip retainers at the top of the A-pillar and on the roof and windshield and then remove it from the car. When installing, put the push pin fastener in the weather strip into the matching hole in the A-pillar at the bottom of the windshield. Put the weather strip between the weather strip retainers on the windshield side and push it gently along the frame. If you need to, place adhesive on the back of the weather strip and attach it to the flange on the lower part of the A-pillar, door sill and B-pillar, then gently push the weather strip into place along the flange in all these areas.