How to Service and Repair the Front Emblem on 2000 Dodge Viper?

To repair the front fascia/hood medallion, use a plastic trim stick to separate the adhesive. Clean residue with Mopar(R) Super Kleen. If reusing the medallion, remove old tape and apply new two-sided tape. Mark the center on masking tape, position the medallion, and press firmly. Warm if below 21 degrees C.

OEM 2000 Dodge Viper Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2000 Dodge Viper Medallion, Black Part Number: PF00W3X
Product Specifications
- Other Name: Ornament - Hood; Medallion Hood
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: PF00W3X
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Medallion, Red Part Number: PF00T1R
Product Specifications
- Other Name: Ornament - Hood; Medallion, Hood (Viper Head); Medallion Hood
- Condition: New
- Fitment Type: Direct Replacement
- SKU: PF00T1R
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Medallion, Charcoal Part Number: PF0005S
Product Specifications
- Other Name: Ornament - Hood; Medallion Hood
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 2.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: PF0005S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Ornament, Black Part Number: JW40M3X
Product Specifications
- Other Name: Ornament - Viper Head; Medallion, Deck Lid (Viper Head); Medallion Viper Head Deck Lid; Medallion Viper Head
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JW40M3X
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Nameplate, Gray Part Number: GM69VSM
Product Specifications
- Other Name: Nameplate
- Item Weight: 0.40 Pounds
- Item Dimensions: 12.5 x 3.1 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GM69VSM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Emblem Parts and Q&A

Q: How to Service and Repair the Front Emblem on 2000 Dodge Viper?
A: To repair the front fascia/hood medallion, use a plastic trim stick to separate the adhesive. Clean residue with Mopar(R) Super Kleen. If reusing the medallion, remove old tape and apply new two-sided tape. Mark the center on masking tape, position the medallion, and press firmly. Warm if below 21 degrees C.